RELEASE READINESS

Know when your hardware is ready to release.

Upload a CSV or Excel BOM, inspect component and supplier evidence, compare alternatives, and record an engineering decision against a saved revision. Monitor selected parts when checks are enabled.

✓ 14 days of full access✓ No credit card required✓ CSV and Excel BOMs
Read the release-readiness checklist
Xmotor_controller_rev_c.xlsx1,842 components · 36 supplier records
Motor Controller Rev CEngineering Review
BOM receivedIllustrative sample
ILLUSTRATIVE RELEASE REVIEW · SAMPLE BOM

Motor Controller Rev C

motor_controller_rev_c.xlsx
BOM received
ReceivedValidatingAnalyzingRisksCopilotEvidenceRecSupplierDecisionApprovedMonitor
UploadValidateAnalyzeDecideMonitor
▤
motor_controller_rev_c.xlsxIllustrative sample · 1,842 componentsSample file
SPREADSHEET PREVIEW
Part NumberManufacturerQtySupplier
MPU6050InvenSense820DigiKey
LM35DNTexas Instruments1,240Mouser
TPS54331Texas Instruments560Newark
1,842 sample rows4 required columns matched
Parsing rowsMatching lifecycleChecking suppliersRetrieving decisionsConfigure monitoring
BOM HealthPendingRelease readiness
Release blockersPendingProduction impact
Lifecycle alertsPendingMatched notices
AlternatesPendingQualified sources
Priority risksTop 3 examples · 4 blockers total
1MPU6050EOL · single approved sourceBLOCKER
2LM35DN18-week lead time · single sourceQUALIFY
3TPS54331Lifecycle change detectedMONITOR
Supplier intelligenceLM35DN · authorized sources
SupplierMPNStockLeadRegionLifecycleConc.Status
DigiKeyAuthorizedLM35DN42,8608 wkUSActiveLowRecommended
MouserAuthorizedLM35DN31,24010 wkGlobalActiveMedQualified
NewarkAuthorizedLM35DN9,81012 wkEUNRNDHighAvailable
✦ Ask CadivorEvidence grounded
Ask a production-readiness question…
Reading 1,842 BOM rowsMatching lifecycle noticesComparing authorized supplyValidating qualified alternatesReviewing prior engineering decisions
14 evidence points · lifecycle · supplier · decision history
EOL notice · MPU6050DigiKey · 42,860 unitsICM-42688-P qualifiedDR-1031 precedent
DR-1048 pending
ENGINEERING DECISION RECORDDR-1048 · Motor Controller Rev C
Owner Jordan EllisConfidence 93%Evidence 14 points

Qualify LM35DN second source and replace MPU6050 before production release.

Evidence verifiedEngineering reviewedAwaiting approvalStarts after approval
Monitored componentsLifecycle · supply · alert rules
MPU6050EOL lifecycle watchSupply stableConfigured
LM35DNSecond-source qualificationLead time trackedConfigured
TPS54331Lifecycle noticeAlert rule matchedConfigured

Scheduled checks depend on workspace opt-in, enabled scheduling, and configured supplier sources.

Lifecycle evidence WaitingSupply evidence WaitingDecision evidence Pending✓ Decision approved · monitoring settings saved
DISTRIBUTOR DATA SOURCES · COVERAGE VARIES BY PARTDigiKeyMouserNewark
RELEASE READINESS72Evidence-linked BOM Health
DECISION TRACEABILITYDR-1048Owner, rationale, approval history
SUPPLIER OPTIONS3 comparedCompared in this illustrative BOM
MONITORING PLANAfter approvalWatch rules follow the engineering decision
ILLUSTRATIVE SAMPLE · ONE RELEASE WORKFLOW

A BOM moves. Evidence follows. Decisions become traceable.

The illustrative motor_controller_rev_c.xlsx review moves from BOM upload through an engineering decision and optional selected-part checks.

motor_controller_rev_c.xlsx1,842 components
  1. 01Upload BOM
    ImportValidated

    1,842 components imported from Excel

    motor_controller_rev_c.xlsx · 36 supplier records normalized
  2. 02Analyze Risk
    AnalysisScored

    BOM Health 72 · 4 release blockers

    MPU6050 EOL · LM35DN lead time · lifecycle notices matched
  3. 03Ask Cadivor
    Evidence reviewReviewing

    Evidence review begins across lifecycle, supply, and alternates

    14 evidence points assembling · 93% confidence target
  4. 04Engineering Decision
    Decision recordApproved

    Mitigation approved · DR-1048 created

    Owner Jordan Ellis · approval linked to the illustrative evidence record
  5. 05Selected-part Monitoring
    MonitorOpt-in

    Review new evidence for selected parts

    Six-hour checks require workspace opt-in, enabled scheduling, and configured supplier sources.
01Analysis resolves the release posture
ENGINEERING INTELLIGENCE

One command center for release readiness.

Risk severity, owners, evidence, alternates, and release posture stay connected.

Illustrative what-if mitigation simulationBaseline risk posture00:00
BOM Health72Release readiness
Release blockers4Production impact
Lifecycle alerts17Matched notices
Approved decisions16Audit history
72Blocked
MPU6050EOL blockerBlocker
LM35DNSource concentrationOpen
TPS54331Lifecycle noticeReview
RELEASE POSTURE

Release blocked by component risks

Cadivor is tracing lifecycle and supplier evidence before recommending action.

Explore the product →
02The engineer asks. Evidence answers.
ASK CADIVOR

Watch evidence become an engineering recommendation.

Cadivor assembles BOM, lifecycle, supplier, alternate, and prior-decision evidence before recommending action.

✓ BOM structure loaded✓ Lifecycle notices checked✓ Supplier exposure compared✓ Alternates validated
ASK CADIVOR · SAMPLE REVIEWmotor_controller_rev_c.xlsx
Ready for engineer question
JEJordan EllisHardware Engineering
Reading 1,842 BOM rowsWaiting
Matching lifecycle noticesWaiting
Comparing authorized supplyWaiting
Validating qualified alternatesWaiting
Reviewing prior decisionsWaiting
BOMLifecycleSupplyAlternatesDecisions
SUPPLIER EVIDENCE
DigiKey · Authorized42,860 units · 8 wk
MPU6050 alternateICM-42688-P qualified
✦ CadivorReviewing evidence…
Analyzing motor_controller_rev_c.xlsx for release blockers and supplier exposure.
Blocking components will appear here

Recommended mitigation will appear after evidence review completes.

03A recommendation becomes a sourcing plan
SUPPLIER INTELLIGENCE

Move from distributor tabs to a qualified sourcing decision.

Compare authorization, inventory, lead time, geography, and concentration in one workspace.

LM35DN
ILLUSTRATIVE RECOMMENDATION

DigiKey is the preferred qualification source.

Authorization AuthorizedRegion GlobalQualification QualifiedStatus Recommended
SupplierAuthMPNInventoryLeadRegionLifecycleConc.Alt qualScoreStatus
QUALIFICATION SUMMARY
Inventory 42,860Lead time 8 weeksLifecycle ActiveConcentration Reduced 38%

Highest authorized inventory with the shortest verified lead time.

04The sourcing plan becomes an auditable decision
DECISION INTELLIGENCE

The output is not another alert. It is a defensible engineering record.

ILLUSTRATIVE SAMPLE
ILLUSTRATIVE SAMPLE · ENGINEERING DECISION RECORD

DR-1048 · Motor Controller Rev C

StatusREADY FOR APPROVAL
OwnerJordan Ellis
Confidence93%
Evidence14 sources
Affected BOMmotor_controller_rev_c.xlsx
Primary partMPU6050 · LM35DN
IssueEOL blocker · single source
ApproverJordan Ellis
MonitoringPending
Approval historyEvidence verified · Reviewed
Evidence traceLinked in this sample
Release impactProduction blocked
DECISION

Qualify the LM35DN second source and replace the MPU6050 before production release.

The action removes a confirmed EOL blocker, reduces single-source exposure, and preserves electrical compatibility.

Evidence assembledEngineering reviewedDecision approvedMonitoring configured
ENGINEERING APPROVALAwaiting approvalIllustrative sample record
Selected-part monitoringPending
BUILT FOR HARDWARE TEAMS

From component data to accountable action.

Engineering

Prioritize release blockers and compatibility risk.

Supply Chain

Compare authorized inventory and source concentration.

Quality

Preserve evidence, ownership, and approval history.

Leadership

See portfolio health and release posture at a glance.

FAQ

Questions hardware teams ask before starting.

What BOM formats does Cadivor accept?

CSV and Excel BOMs are supported, with normalization for common part-number, manufacturer, description, and quantity columns.

Does Cadivor replace engineering judgment?

No. Cadivor organizes evidence, identifies risks, and recommends actions while preserving human ownership and approval.

Can decisions be audited later?

Yes. Decision records preserve the evidence reviewed, rationale, owner, confidence, and approval history.

Can Cadivor monitor approved BOMs?

You can refresh saved supplier evidence manually. Opted-in workspaces can run six-hour scheduled checks when scheduling and supplier sources are enabled. Email alerts and weekly digests require user opt-in, a verified account email, and enabled delivery. Optional Slack alerts require a workspace webhook and enabled monitoring preferences.

START WITH A REAL BOM

Bring your next release decision into Cadivor.

Upload a BOM, surface release blockers, and create an evidence-linked decision record.

Start 14-day free trial →Book a demo
FREE BOM STRESS TEST

See the risks hiding in your BOM.

Upload a CSV or Excel BOM and inspect the first five component checks without creating an account.

ONE-TIME BOM REPORT

One complete report for one BOM.

Get a saved risk analysis and its PDF and CSV reports without a monthly subscription.

A FOCUSED REVIEW

From your parts list to a report your team can use.

Upload one CSV or Excel BOM, review component risks and supporting evidence, then download the standard reports. A Cadivor account keeps the analysis and files available for retrieval.

  • One saved BOM analysis, up to 100 unique components
  • Lifecycle, availability, sourcing, and risk review
  • Standard PDF and CSV report downloads

Try the free audit first if you want to preview the first five component checks. For the full report, create and verify a report-only account, then upload and run your BOM. Cadivor shows the exact unique-component count and active one-time price before checkout. The one-time report covers up to 100 unique components; payment unlocks the full report and standard PDF/CSV downloads, with no trial analyses, ongoing monitoring, or recurring subscription.

PRODUCT

Engineering intelligence from BOM upload to monitored decision.

Cadivor brings guided BOM intake, source-labeled risk evidence, alternate review, saved engineering decisions, BOM revisions, and selected-part monitoring into one release workflow.

Product screens below use an illustrative BOM and example results. Your review depends on the data available for your parts.

Start free trialExplore all features
BOM ANALYZER

Normalize spreadsheet data and rank release risk.

Import CSV or Excel BOMs, validate columns, match lifecycle notices, and score production impact before release review begins.

1,842 rows validatedBOM Health 724 release blockers
motor_controller_rev_c.xlsxImport validated
PartManufacturerQtyRisk
MPU6050InvenSense820Blocker
LM35DNTI1,240Qualify
TPS54331TI560Monitor
ENGINEERING INTELLIGENCE

One command center for release readiness.

Risk severity, owners, evidence, alternates, and release posture stay connected as mitigation progresses.

Health 72 → 96Blockers 4 → 0
Release postureBaseline risk posture
BOM Health72
Blockers4
Alerts17
Decisions16
ASK CADIVOR

Evidence-grounded answers for production readiness.

Engineers ask release questions and Cadivor assembles BOM, lifecycle, supplier, alternate, and prior-decision evidence before recommending action.

93% confidence14 evidence points
Illustrative sampleReady
Is this BOM ready for production release?
Analyzing release blockers and supplier exposure…
SUPPLIER INTELLIGENCE

Compare authorized inventory and concentration.

Review stock, lead time, region, lifecycle status, and qualification posture across authorized distributors.

LM35DN sourcingAuthorized sources
SupplierStockLeadStatus
DigiKey42,8608 wkRecommended
Mouser31,24010 wkQualified
Newark9,81012 wkAvailable

DigiKey is the preferred qualification source.

ALTERNATE QUALIFICATION

Validate compatibility before changing the BOM.

Compare electrical compatibility, availability, and mitigation value for alternate components before release approval.

MPU6050 mitigationQualified alternate
CurrentMPU6050

EOL · single source

AlternateICM-42688-P

Qualified · compatible

ENGINEERING DECISION RECORDS

Capture rationale, owner, evidence, and approval.

Every recommendation becomes a defensible engineering record with traceable evidence and approval history.

DR-1048Ready for approval
ENGINEERING DECISION

Qualify LM35DN second source and replace MPU6050.

Owner Jordan Ellis · 93% confidence · 14 evidence sources · Monitoring is optional after approval.

SELECTED-PART MONITORING

Review new evidence for chosen parts.

Refresh supplier data manually, or use six-hour scheduled checks when enabled for an opted-in workspace. Email alerts and weekly digests require user opt-in, a verified account email, and enabled delivery. Optional Slack alerts require a workspace webhook and enabled monitoring preferences.

Monitoring configured3 selected · sample
MPU6050Lifecycle watchLM35DNLead time trackedTPS54331Alert rule matched
REPORTS & EXPORTS

Export engineering artifacts, not marketing summaries.

Generate BOM health, lifecycle exposure, decision records, and supplier risk summaries for review and audit.

Report libraryEngineering outputs
BOM HEALTH72 / 100
LIFECYCLE17 lifecycle alerts
DECISIONDR-1048 approved

See the complete engineering workflow on your own BOM.

Start free trial →
SOLUTIONS

One decision system for every team touching the BOM.

Cadivor connects engineering, supply chain, quality, and leadership around the same evidence — not separate spreadsheets and distributor tabs.

HARDWARE ENGINEERING

Release with fewer hidden component risks.

Prioritize design blockers, validate alternates, and review recommendations grounded in the active BOM.

  • Production-readiness review
  • Lifecycle exposure analysis
  • Alternate qualification
Release reviewBOM Health 72 · illustrative sample
Blockers4
Lifecycle alerts17
Alternates3
PostureBlocked
SUPPLY CHAIN & PROCUREMENT

Act before lead time and concentration become emergencies.

Compare authorized inventory, supplier coverage, geography, and sourcing exposure in one workspace.

  • Authorized-source intelligence
  • Lead-time comparison
  • Recommended source selection
LM35DN qualificationDigiKey recommended
DigiKey · 42,860 · 8 wkRecommended
Mouser · 31,240 · 10 wkQualified
Newark · 9,810 · 12 wkAvailable
QUALITY & COMPLIANCE

Make every decision traceable.

Preserve evidence, rationale, ownership, and approval history in structured engineering records.

  • Evidence-linked records
  • Approval history
  • Audit-ready exports
DR-1048Audit trail complete
DECISION RECORD

Evidence verified · Engineering reviewed · Approval recorded

14 sources · Owner Jordan Ellis · Evidence linked to the illustrative sample · Compliance context preserved.

ENGINEERING LEADERSHIP

See release posture across the portfolio.

Understand BOM health, blockers, decisions, and monitoring status without chasing spreadsheets.

  • Portfolio health
  • Open blockers
  • Approved decisions
Portfolio viewIllustrative sample · release posture
Monitored BOMs12
Open blockers4
Approved decisions18
Release ready96
Built forIndustrialMedical DevicesAutomotiveAerospaceRoboticsConsumer Hardware
PRICING

Start with one BOM. Scale to an engineering decision system.

Clear plans for students, individual engineers, teams, and enterprise programs. Standard workspaces can start with a 14-day free trial; the one-time report path uses a report-only account with no trial analyses.

JUST ONE BOM?

Get one full report without a subscription.

For a focused analysis and PDF/CSV downloads. Free audit and recurring plans are separate options.

Explore one-time reports →
Student

Free

For verified students, university teams, and capstone projects.

Request access
  • 5 BOM analyses/month
  • 50 components/BOM
  • Basic risk analysis
  • Student Edition reports
Starter

$29/month

For individual engineers, freelancers, and early hardware teams.

Start free trial
  • 10 BOM analyses/month
  • 100 components/BOM
  • Supplier intelligence
  • PDF and CSV reports
Business

$299/month

For cross-functional engineering and sourcing teams.

Talk to sales
  • Everything in Professional, plus
  • Team collaboration
  • Unlimited monitoring
  • API access
  • Advanced supplier intelligence
Enterprise

Custom

For larger organizations and governed deployments.

Book a demo
  • Everything in Business, plus
  • Role-based workspace access and audit exports
  • SSO planned (identity-provider setup required)
  • Custom integrations by agreement
  • Support terms agreed before contract

Compare plans

CapabilityStudentStarterProfessionalBusinessEnterprise
BOM analysis5 / month10 / monthUnlimitedUnlimitedUnlimited
Components / BOM50100UnlimitedUnlimitedUnlimited
Ask Cadivor——✓✓✓
Monitoring——2,500 partsUnlimitedUnlimited
Team collaboration———✓✓
API and integrations———✓Custom
RESOURCES

Practical engineering intelligence for hardware teams.

Guides, reports, and templates designed around real BOM and release decisions.

ILLUSTRATIVE REPORT EXAMPLES

Reports built for engineering review, not marketing summaries.

Every report connects the risk, evidence, owner, recommendation, and approval state.

LIFECYCLE EXPOSURE17 lifecycle alerts
BOM HEALTH72 / 100
DECISION RECORDDR-1048 · ApprovedIllustrative evidence · Monitoring configured
COMPANY

Building decision infrastructure for hardware engineering.

Cadivor exists to help teams move from scattered component data to clear, defensible action.

OUR MISSION

Make every hardware decision evidence-linked, accountable, and monitorable.

Engineering teams still make critical component decisions across spreadsheets, distributor tabs, email threads, and disconnected reports. Cadivor brings the evidence and decision into one operating system.

Evidence over guesswork

Recommendations should show the facts behind them.

  • BOM, lifecycle, and supplier evidence linked
  • 14 evidence points in the sample decision
Engineering judgment stays central

AI supports decisions; people own them.

  • Human owner on every record
  • Approval before release action
Decisions deserve history

Rationale and approvals should survive the meeting.

  • Rationale and approval history preserved
  • Approver and timestamp preserved
Monitoring closes the loop

Approved decisions must remain safe as conditions change.

  • Lifecycle and supply alerts
  • Post-approval watch rules
BUILT AROUND THE DECISION

Cadivor does not stop at identifying risk.

It carries evidence into a recommendation, captures human judgment, and monitors the approved action over time.

ILLUSTRATIVE ENGINEERING DECISION RECORDQualify ICM-42688-P as alternateSample owner · Maya ChenIllustrative confidence · 93%Evidence · 14 sample pointsAPPROVED
1Connected release workflow
14Evidence points in one sample decision
After approvalLifecycle and supply changes monitored
User-ledEngineering approvals
BOOK A DEMO

Request a conversation

Share your workflow context — we respond within one business day.

Your request is saved for follow-up. If email notification is unavailable, the confirmation will show a backup contact option.